Peak control current in boundary conduction mode and discontinuous conduction mode for inverter with flyback topology

L. G. Gonzalez; Pablo Vanegas; Rodrigo Sempertegui; Oscar Carranza

doi:10.1109/PEPQA.2015.7168235

Peak control current in boundary conduction mode and discontinuous conduction mode for inverter with flyback topology

L. G. Gonzalez, Pablo Vanegas, Rodrigo Sempertegui, Oscar Carranza

Producción científica: Capítulo del libro/informe/acta de congreso › Contribución a la conferencia › revisión exhaustiva

5 Citas (Scopus)

Resumen

This paper proposes a hybrid control scheme peak current, applied to a single-phase micro inverter with flyback topology coupled to a LC filter, the proposed scheme allows the inverter to operate by boundary conduction mode when the output current exceeds a predetermined value. Otherwise, it operates in the discontinuous conduction mode, limiting the switching frequency. To set the control system in both modes of operation, the inverter is identified by averaging the model state and small signal, the control scheme used, presents a classic PI control and is tuned by pole placement. The proposed control scheme is verified through computer simulation.

Idioma original	Inglés
Título de la publicación alojada	2015 IEEE Workshop on Power Electronics and Power Quality Applications, PEPQA 2015 - Proceedings
Editorial	Institute of Electrical and Electronics Engineers Inc.
ISBN (versión digital)	9781467376525
DOI	https://doi.org/10.1109/PEPQA.2015.7168235
Estado	Publicada - 27 jul. 2015
Evento	2nd IEEE Workshop on Power Electronics and Power Quality Applications, PEPQA 2015 - Bogota, Colombia Duración: 2 jun. 2015 → 4 jun. 2015

Serie de la publicación

Nombre	2015 IEEE Workshop on Power Electronics and Power Quality Applications, PEPQA 2015 - Proceedings

Conferencia

Conferencia	2nd IEEE Workshop on Power Electronics and Power Quality Applications, PEPQA 2015
País/Territorio	Colombia
Ciudad	Bogota
Período	2/06/15 → 4/06/15

Acceder al documento

10.1109/PEPQA.2015.7168235

Otros archivos y enlaces

Enlace a la publicación en Scopus

Citar esto

Gonzalez, L. G., Vanegas, P., Sempertegui, R., & Carranza, O. (2015). Peak control current in boundary conduction mode and discontinuous conduction mode for inverter with flyback topology. En 2015 IEEE Workshop on Power Electronics and Power Quality Applications, PEPQA 2015 - Proceedings Artículo 7168235 (2015 IEEE Workshop on Power Electronics and Power Quality Applications, PEPQA 2015 - Proceedings). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/PEPQA.2015.7168235

Gonzalez, L. G. ; Vanegas, Pablo ; Sempertegui, Rodrigo et al. / Peak control current in boundary conduction mode and discontinuous conduction mode for inverter with flyback topology. 2015 IEEE Workshop on Power Electronics and Power Quality Applications, PEPQA 2015 - Proceedings. Institute of Electrical and Electronics Engineers Inc., 2015. (2015 IEEE Workshop on Power Electronics and Power Quality Applications, PEPQA 2015 - Proceedings).

@inproceedings{39a1748279ed40888821a3e5cd14dad1,

title = "Peak control current in boundary conduction mode and discontinuous conduction mode for inverter with flyback topology",

abstract = "This paper proposes a hybrid control scheme peak current, applied to a single-phase micro inverter with flyback topology coupled to a LC filter, the proposed scheme allows the inverter to operate by boundary conduction mode when the output current exceeds a predetermined value. Otherwise, it operates in the discontinuous conduction mode, limiting the switching frequency. To set the control system in both modes of operation, the inverter is identified by averaging the model state and small signal, the control scheme used, presents a classic PI control and is tuned by pole placement. The proposed control scheme is verified through computer simulation.",

keywords = "BCD, DCM, control peak current, flyback topology, micro-inverter",

author = "Gonzalez, \{L. G.\} and Pablo Vanegas and Rodrigo Sempertegui and Oscar Carranza",

note = "Publisher Copyright: {\textcopyright} 2015 IEEE.; 2nd IEEE Workshop on Power Electronics and Power Quality Applications, PEPQA 2015 ; Conference date: 02-06-2015 Through 04-06-2015",

year = "2015",

month = jul,

day = "27",

doi = "10.1109/PEPQA.2015.7168235",

language = "Ingl{\'e}s",

series = "2015 IEEE Workshop on Power Electronics and Power Quality Applications, PEPQA 2015 - Proceedings",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

booktitle = "2015 IEEE Workshop on Power Electronics and Power Quality Applications, PEPQA 2015 - Proceedings",

}

Gonzalez, LG, Vanegas, P, Sempertegui, R & Carranza, O 2015, Peak control current in boundary conduction mode and discontinuous conduction mode for inverter with flyback topology. En 2015 IEEE Workshop on Power Electronics and Power Quality Applications, PEPQA 2015 - Proceedings., 7168235, 2015 IEEE Workshop on Power Electronics and Power Quality Applications, PEPQA 2015 - Proceedings, Institute of Electrical and Electronics Engineers Inc., 2nd IEEE Workshop on Power Electronics and Power Quality Applications, PEPQA 2015, Bogota, Colombia, 2/06/15. https://doi.org/10.1109/PEPQA.2015.7168235

Peak control current in boundary conduction mode and discontinuous conduction mode for inverter with flyback topology. / Gonzalez, L. G.; Vanegas, Pablo; Sempertegui, Rodrigo et al.
2015 IEEE Workshop on Power Electronics and Power Quality Applications, PEPQA 2015 - Proceedings. Institute of Electrical and Electronics Engineers Inc., 2015. 7168235 (2015 IEEE Workshop on Power Electronics and Power Quality Applications, PEPQA 2015 - Proceedings).

Producción científica: Capítulo del libro/informe/acta de congreso › Contribución a la conferencia › revisión exhaustiva

TY - GEN

T1 - Peak control current in boundary conduction mode and discontinuous conduction mode for inverter with flyback topology

AU - Gonzalez, L. G.

AU - Vanegas, Pablo

AU - Sempertegui, Rodrigo

AU - Carranza, Oscar

PY - 2015/7/27

Y1 - 2015/7/27

N2 - This paper proposes a hybrid control scheme peak current, applied to a single-phase micro inverter with flyback topology coupled to a LC filter, the proposed scheme allows the inverter to operate by boundary conduction mode when the output current exceeds a predetermined value. Otherwise, it operates in the discontinuous conduction mode, limiting the switching frequency. To set the control system in both modes of operation, the inverter is identified by averaging the model state and small signal, the control scheme used, presents a classic PI control and is tuned by pole placement. The proposed control scheme is verified through computer simulation.

AB - This paper proposes a hybrid control scheme peak current, applied to a single-phase micro inverter with flyback topology coupled to a LC filter, the proposed scheme allows the inverter to operate by boundary conduction mode when the output current exceeds a predetermined value. Otherwise, it operates in the discontinuous conduction mode, limiting the switching frequency. To set the control system in both modes of operation, the inverter is identified by averaging the model state and small signal, the control scheme used, presents a classic PI control and is tuned by pole placement. The proposed control scheme is verified through computer simulation.

KW - BCD

KW - DCM

KW - control peak current

KW - flyback topology

KW - micro-inverter

UR - https://www.scopus.com/pages/publications/84947579801

U2 - 10.1109/PEPQA.2015.7168235

DO - 10.1109/PEPQA.2015.7168235

M3 - Contribución a la conferencia

AN - SCOPUS:84947579801

T3 - 2015 IEEE Workshop on Power Electronics and Power Quality Applications, PEPQA 2015 - Proceedings

BT - 2015 IEEE Workshop on Power Electronics and Power Quality Applications, PEPQA 2015 - Proceedings

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 2nd IEEE Workshop on Power Electronics and Power Quality Applications, PEPQA 2015

Y2 - 2 June 2015 through 4 June 2015

ER -

Gonzalez LG, Vanegas P, Sempertegui R, Carranza O. Peak control current in boundary conduction mode and discontinuous conduction mode for inverter with flyback topology. En 2015 IEEE Workshop on Power Electronics and Power Quality Applications, PEPQA 2015 - Proceedings. Institute of Electrical and Electronics Engineers Inc. 2015. 7168235. (2015 IEEE Workshop on Power Electronics and Power Quality Applications, PEPQA 2015 - Proceedings). doi: 10.1109/PEPQA.2015.7168235

Peak control current in boundary conduction mode and discontinuous conduction mode for inverter with flyback topology

Resumen

Serie de la publicación

Conferencia

Acceder al documento

Otros archivos y enlaces

Huella

Citar esto